Slide3
Slide3

Ford Truck

REAR DISC BRAKES

F-100 1953-1956 (wheel bolt pattern 5 lugs x 5 1/2 inch circle)

9" Ford rear axle 1957 to 1986 (all three bearing ends)  (wheel bolt pattern 5 lugs x 5 1/2 inch circle)

9" Bronco rear axle 1966 -1986 (all three bearing ends)  (wheel bolt pattern 5 lugs x 5 1/2 inch circle)

7.5 & 8.8 Ranger & Bronco II & Explorer  (wheel bolt pattern 5 lugs x 4 1/2 inch circle)

8.8 F 150 & Bronco (wheel bolt pattern 5 lugs x 5 1/2 inch circle)  1980 thru 1996, E-150 to 2006

8.8 & 9.75 1997 & Later F 150 rear axle (wheel bolt pattern 5 lugs x 135mm circle)  1997 to current

Ford Dana 60 1967-1972 Full floating rear axle.  (wheel bolt pattern 8 lugs x 6 1/2 inch circle)  The drum is on the back side of the hub take out the studs to remove the drum.

Ford Dana 60 1972-1979 Full floating rear axle.  (wheel bolt pattern 8 lugs x 6 1/2 inch circle)  The drum is on the back side of the hub take out the studs to remove the drum.

Ford Dana 60 & 61 1980-1996  (wheel bolt pattern 8 lugs x 6 1/2 inch circle)

Ford Dana 60 & 61 1980-1996 semi float  (wheel bolt pattern 8 lugs x 6 1/2 inch circle)

Ford Sterling 3/4 1 ton 1981-1998  (wheel bolt pattern 8 lugs x 6 1/2 inch circle)

Ford Sterling Dual Rear Wheel 1981 to 1998  (wheel bolt pattern 8 lugs x 6 1/2 inch circle)

Dimpled and Slotted Rotors are available for most TSM Disc Brake Conversions!!! For an additional labor cost of $79.95 a pair

 

slottedrotors2

Copyright © TSM Mfg. Co., Inc.