Ford Car


8 & 9 inch Ford rear disc brake complete kit includes: CNC cut brackets, fasteners, short cable extension (connects park brake cable), spacer plates, studs, stainless brake lines, new 11 1/4" vented rotors & New (not rebuilt) Calipers with a parking brake.     Fits small bearing, large bearing, and large bearing style 2. Fits 15 Inch and Larger Disc Brake Style Wheels  Rear Disc Brake Conversion using Wilwood calipers $639.95  Part # 2100+     

WITHOUT a Parking Brake $439.95 Part # 2100-  

Order Now


Individual Parts Options

Upgrade this Kits rotors to Dimpled & Slotted

Ordering Information

Ford axles are not accurate on the back side of the backing plate flange. Our brackets mount to the front accurate side of the axle housing. Ford axles also have at least 3 different lengths. Our brackets are adjustable to cover all axle lengths.

Our rotors slip over the axle once the axle is installed. The axle flange does not have to be reduced and the access holes in the axles are not covered up making it easy to tighten the axles into the housing.

SIDE NOTE: Our Kits do not use inferior rotors that install on the back side of the axle. With the inferior rotors, axle and rotor have to be installed together which is much heavier and the access holes for tightening the T-bolts are blocked. The studs are also shortened by the thickness of the rotor and only partial splines go into the axle. The studs might turn when the wheel is removed.


Installation Instructions



Copyright © TSM Mfg. Co., Inc.